User Guide for SIP-T58V/A Smart Media Phone
170
2. Enter the string (e.g., 1) in the Prefix field.
3. Enter the string (e.g., 1234) in the Replace field.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Add to add the replace rule.
When you enter the number “1” and then tap Send, the phone will dial out “1234” instead.
Note
To edit a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select the desired replace rule by checking the checkbox.
3. Edit the values in the Prefix and Replace fields.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Edit to accept the change.
To delete one or more replace rules via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select one or more replace rules by checking the checkbox(es).
3. Click Del to delete the replace rule(s).
Dial-now
You can configure one or more dial-now rules (up to 100) on your phone. When the dialed
number matches the dial-now string, the number will be dialed out automatically. For example,
a dial-now rule is configured as "2xx", any entered three-digit string beginning with 2 will then
The valid values for the Account field can be one or more digits among 1-16. Every two digits
must be separated by a comma. For example, when you enter the value “1, 2” in the Account
field, this replace rule will apply to account1 and account2.
If you leave the Account field blank or enter 0, the replace rule will apply to all accounts.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
