Yealink SIP-T58A User Manual

User Guide for SIP-T58V/A Smart Media Phone
290
To enable call forward in custom mode:
1. Do one of the following:
- Swipe down from the top of the screen or swipe left/right to go to the second idle
screen.
Tap Settings->Features->Call Forward.
- Press when the phone is idle.
- Swipe down from the top of the screen to enter the control center and then tap
Forward.
2. Tap the desired account.
3. Tap the desired forwarding type.
4. Depending on your selection:
a) If you tap Always Forward:
1) Tap the On radio box in the Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in the
Forward To field.

Yealink SIP-T58A Specifications

General

Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Operating system version	5.1.1
Operating system installed	Android
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Bluetooth	No
Security algorithms	SRTP
Networking standards	IEEE 802.1x
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv4/IPv6, UDP/TCP/DNS-SRV
USB 2.0 ports quantity	2
Voice codecs	G.711Mu, G.711a, G.722, G.722.1, G.722.1C, G.723, G.726, G.729ab, iLBC
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Front camera resolution (numeric)	2 MP
Base station keys	27
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
Power consumption (typical)	1.9 W
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	220 mm
Width	259.4 mm
Height	239 mm
Package depth	293 mm
Package width	324 mm
Package height	128 mm