Basic Phone Features
307
To use this feature, contact your system administrator for the network conference URI in
advance.
Note
To configure network conference via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Network Conference from the pull-down list of Conference Type.
4. Enter the conference URI (e.g., conference@example.com) in the Conference URI field.
5. Click Confirm to accept the change.
Note
To set up a network conference call:
1. Place a call to the first party.
2. Tap the Conference soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and press or tap Conference.
4. When the second party answers the call, tap the Conference soft key to add the second
party to the conference.
5. Tap the Conference soft key to place a new call.
The conference call is placed on hold.
Network conference is configurable via web user interface only.
Network conference is not available on all servers. Contact your system administrator for more
information.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
