Yealink SIP-T58A User Manual

User Guide for SIP-T58V/A Smart Media Phone
320
Configuring Transfer Mode via DssKey
When there is an active call on the IP phone, you can handle the active call differently
depending on the configuration of the transfer mode via Dsskey with the BLF key.
To configure the transfer mode via Dsskey via web user interface:
1. Click on Features->Transfer.
2. Select the desired transfer mode from the pull-down list of Transfer Mode via Dsskey.
 If you select Blind Transfer, tap the BLF key to blind transfer the call to the monitored
user.
 If you select Attended Transfer, tap the BLF key to dial out the monitored phone
number and then perform an attended or a semi-attended transfer.
 If you select New Call, tap the BLF key to place a new call to the monitored user.
The original call is placed on hold.
3. Click Confirm to accept the change.
Note
Configuring Directed Call Pickup Code
If you configure the directed call pickup code in advance, you can pick up the monitored user’s
incoming call by tapping the BLF key. You can configure the directed call pickup code when
configuring a BLF key. For more information, refer to Configuring a BLF Key on page 317. You
can also configure the directed call pickup code on a global or per-line basis via web user
interface.
If you enable visual alert feature, you can also pick up the monitored user’s incoming call by
tapping the DPickup soft key. To use the DPickup soft key to pick up the call, the call pickup
code can only be configured on a global or per-line basis via web user interface.
Note
The pickup code is used in the following order of preference: Extension (DSSKey->Line
Key)>Directed Call Pickup Code (Account->Advanced)>Directed Call Pickup Code
(Features->Call Pickup). If pickup code is not configured, tapping the BLF key/DPickup soft key
will directly call the monitored user when he/she receives an incoming call.
Transfer Mode via DssKey is also applicable to BLF list feature.

Yealink SIP-T58A Specifications

General

Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Operating system version	5.1.1
Operating system installed	Android
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Bluetooth	No
Security algorithms	SRTP
Networking standards	IEEE 802.1x
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv4/IPv6, UDP/TCP/DNS-SRV
USB 2.0 ports quantity	2
Voice codecs	G.711Mu, G.711a, G.722, G.722.1, G.722.1C, G.723, G.726, G.729ab, iLBC
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Front camera resolution (numeric)	2 MP
Base station keys	27
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
Power consumption (typical)	1.9 W
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	220 mm
Width	259.4 mm
Height	239 mm
Package depth	293 mm
Package width	324 mm
Package height	128 mm