Yealink SIP-T58A User Manual

Getting Started
33
To connect the PoE:
1. Connect the Ethernet cable between the Internet port on the phone and an available port
on the in-line power switch/hub.
Note
7) Connect the optional USB flash drive
When you attach a USB flash drive to your phone, the touch screen will prompt “USB device
connected successfully!”, the icon will display on the status bar. You can access and
manage photo/video/audio files in USB flash drive by FileManager application. For more
information, refer to FileManager on page 191.
Note
The USB port (on the rear of the phone) can also be used to connect color-screen expansion
module EXP50 or USB headset. The SIP-T58V/A smart media phone officially supports certain
USB headset models. For more information, refer to Tested headset list compatible with Yealink
IP Phone .
For more information on how to use EXP50, refer to Yealink EXP50 User Guide . For more
information on how to use USB headset, refer to the documentation from the manufacturer.
If in-line power is provided, you don’t need to connect the phone to the power adapter. Make
sure the switch/hub is PoE-compliant.
Important! Do not remove power to the phone while it is updating firmware and configurations.

Yealink SIP-T58A Specifications

General

Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Operating system version	5.1.1
Operating system installed	Android
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Bluetooth	No
Security algorithms	SRTP
Networking standards	IEEE 802.1x
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv4/IPv6, UDP/TCP/DNS-SRV
USB 2.0 ports quantity	2
Voice codecs	G.711Mu, G.711a, G.722, G.722.1, G.722.1C, G.723, G.726, G.729ab, iLBC
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Front camera resolution (numeric)	2 MP
Base station keys	27
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
Power consumption (typical)	1.9 W
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	220 mm
Width	259.4 mm
Height	239 mm
Package depth	293 mm
Package width	324 mm
Package height	128 mm