Yealink T42S

Audio Features
405
Parameter
phone_setting.vq_rtcpxr_display_round_trip_delay.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display RoundTripDelay on the LCD screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings->Voice Monitoring->Report options on phone->RoundTripDelay
Parameter
phone_setting.vq_rtcpxr_display_moslq.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display MOS-LQ on the LCD screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings->Voice Monitoring->Report options on phone->MOS-LQ
Parameter
phone_setting.vq_rtcpxr_display_moscq.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display MOS-CQ on the LCD screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings->Voice Monitoring->Report options on phone->MOS-CQ
Central Report Collector
To operate with central report collector, IP phones must be configured to forward their voice quality
reports to the specified report collector. You can specify the report collector on a per-line basis.
Topic
Central Report Collector Configuration
Central Report Collector Configuration
The following table lists the parameters you can use to configure central report collector.