Call Features
29
2. Select the desired contact group or All Contacts.
3. Highlight the desired contact and select Send.
On the T48S/T48G phones, tap the desired contact.
If the selected contact has multiple numbers, highlight the desired number, and select Send.
Related Topic
Searching for Contacts
Placing an Anonymous Call
You can hide your name and number when you place a call. As a result, the callee receives an anonymous call without
caller identity.
Before You Begin
Contact with your system administrator to find out if this feature is available on your phone, and to get the anonymous
call on code or off code if required.
Procedure
1. Navigate to Menu > Features > Anonymous (Anonymous Call).
2. Select the desired line.
On the T42S/T42G/T41S/T41P/T40P/T40G phones, select the desired line from the Line ID field.
3. Select Enabled or On from the Local Anonymous field.
4. (Optional.) Select the desired value from the Send Anony Code (Send Anonymous Code) field.
5. (Optional.) Enter the anonymous call on code and off code respectively.
6. Select Save.
7. Select the anonymous line to place a call.
The callee is prompted with an incoming call from anonymity.
If the callee enables anonymous rejection feature, you may be prompted that the callee does not accept calls from
an anonymous number.
To Next Page
Loading...
