Advanced Call Features
68
Retrieving a Call Parked to the Monitored Line
State Indicator of Remote Line by BLF List Key
You can get the monitored line's status by viewing the LED and icon indicator of the BLF List key.
The state indicator of the BLF list key varies by phone models.
LED Status
Icons
Description
T48S/T48G T46S/T46G
Solid green The monitored line is idle.
Fast-flashing red
(Flashing)
The monitored line is ringing.
(Flashing)
The monitored line is dialing.
Solid red The monitored line is busy or in a call.
Slowly-flashing red
The monitored line places a call on hold.
A call is parked to the monitored line.
Off The monitored line fails to register or does not exist.
Audio Alert for BLF Pickup
The Audio Alert for BLF Pickup feature allows your phone to play a tone when the specified monitored line receives an
incoming call.
Topic
Setting an Alert Tone for Monitored Lines
Setting an Alert Tone for Monitored Lines
You can set the alert ring type for the monitored lines to make it easier to recognize.
Before You Begin
Check with your system administrator to find out if the Audio Alert for BLF Pickup feature is available.
Procedure
1. Navigate to Menu > Basic > Sound > BLF Ring Type.
On the T42S/T42G/T41S/T41P/T40P/T40G phones, navigate to Menu > Settings > Basic Settings > Sound > BLF
Ring Type.
2. Select the desired ring tone.
3. Select Save.
Visual Alert for BLF Pickup
Your system administrator can configure your phone to display the call information when the specified monitored line
receives an incoming call.
To Next Page
Loading...
