Yealink T4 Series IP Phones User Guide
32
Answering a Call Automatically
Auto answer enables you to automatically answer an incoming call in speakerphone (hands-free) mode when your
phone is idle.
Note
When you are in an active call and an incoming call arrives on the phone, the incoming call will not be automatically
answered even if the auto answer is enabled.
Your system administrator can configure the phone to automatically answer the incoming call after ending all calls.
Procedure
1. Navigate to Menu > Features > Auto Answer.
2. Select the desired line.
3. Enable the Auto Answer.
4. Enable the Auto Answer Mute.
5. Select Save.
If the auto answer feature is enabled for the default account, the auto answer icon appears on the phone screen.
Switching Among the Handset, Speakerphone and Headset
Modes
You can select the desired mode before placing a call or can alternate among Speakerphone, headset, and handset
modes during a call.
When using the speakerphone or the headset, the LED indicator glows green. The T40P/T40G phones do not have key
light.
Procedure
1. During the call, pick up the handset, press the Speakerphone key , or press the HEADSET key.
For example, if you're using the handset, press the HEADSET key to switch to the headset, or press the Speak-
erphone key to switch to the speakerphone.
Note
Your system administrator can disable you to use the handset, speakerphone (Hands-free) or headset mode.
Related Topic
Headset
To Next Page
Loading...
