Yealink T42S

Advanced Call Features
60
Parking a Call in the FAC Mode
Retrieving a Parked Call in the FAC Mode
Parking a Call in the FAC Mode
You can park a call in the FAC mode directly. When you park a call to the local extension or the desired extension, the
call is held in the same network your phone.
Before You Begin
Your system administrator has set call park in the FAC mode.
Procedure
1. During a call, select Park (You may need to press the More( ) soft key to see the Park soft key).
The phone will dial the call park code which is pre-configured.
2. Do one of the following:
l If you want to park the call against the local extension, press the # key.
l If you want to park the call against the desired extension, enter the extension (for example, 4606) where you
want to park the call and press the # key.
If the call is parked successfully, you will hear a voice prompt that the call is parked.
Tip
You can use a Park key or a BLF key to park a call to a specific contact directly.
Related Topics
Parking or Retrieving a Call with a Park or Retrieve Key
Parking or Retrieving a Call by BLF Key
Retrieving a Parked Call in the FAC Mode
You can retrieve a parked call in the FAC mode from any phone within your network.
Before You Begin
Your system administrator has set call park in the FAC mode. There is a call parked on the extension.
Procedure
1. Select Retrieve (You may need to press the More( ) soft key to see the Retrieve soft key) on the dialing
screen.
The phone will dial the park retrieve code which is configured in advance.
2. Follow the voice prompt to retrieve:
l Press the # key on the phone where the call is parked.
l Enter the desired extension followed by # (for example, 4606#) on any phone.
Tip
When the phone is idle, you can use a Retrieve key or a BLF key to retrieve a parked call directly.
Related Topics
Parking or Retrieving a Call with a Park or Retrieve Key
Parking or Retrieving a Call by BLF Key