Yealink T5 Series User Manual

Basic Call Features
109
Answering When Not in Another Call
Procedure:
Do one of the following:
- Pick up the handset.
- Press the Speakerphone key. The key LED glows green.
With the handset on-hook and headset mode deactivated, you can press Answer or the
line key on which receives an incoming call.
- Press the HEADSET key. The key LED glows green.
With the headset mode activated, you can press Answer or the line key on which receives
an incoming call.
Note
Answering When in Another Call
If you are in an active call and an incoming call arrives on the same or a different line, the
incoming call information is displayed on the LCD screen.
Procedure:
1. Press Answer.
The incoming call is answered and the original call is placed on hold.
If the phone just plays a warning tone instead of displaying the incoming call information, you
can only answer the incoming call after ending the current call. It is configurable by your system
administrator.
Note
Your system administrator can disable you to answer a call by picking up the handset, pressing
the Speakerphone key or HEADSET key.
The call waiting should be enabled first, otherwise, the incoming call is automatically rejected by
the phone with a busy message when there is an active call on the phone. For more information,
refer to Configuring the Call Waiting.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English