Yealink T5 Series User Manual

Customizing Your Phone
43
The IP phone will automatically display the XML items (for example, notifications or
company logo, refer to Configuring the XML Browser URL) along with system picture or
custom pictures (if uploaded) as the screen saver.
5. Press Save.
Screen saver is configurable via web user interface at the path Settings->Preference.
Power Saving
The power saving feature is used to turn off the backlight and screen to conserve energy. The IP
phone enters power-saving mode after it has been idle for a certain period of time. The power
LED glows red for 500ms and goes out for 3000ms alternately.
Note
The IP phone will exit power-saving mode if one of the following phone events occurs:
 Press any key.
 Pick up/hang up the handset.
 There is an incoming call.
 A new prompt (for example, missed call, new voice mail or forwarded call).
 The status of BLF key changes.
If the screen saver is enabled (refer to Screen Saver) on your phone, power-saving mode will still
occur.
You can configure the following power-saving settings:
 Office Hour
 Idle Timeout (minutes)
Enabling the Power Saving
Procedure:
1. Click Settings->Power Saving.
Your system administrator can disable the power LED indicator for power saving.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English