Yealink T5 Series User Manual

User Guide for T5 Series IP Phones
164
Intercom Allow
Intercom Allow allows the IP phone to automatically answer an incoming intercom call. If you
disable this feature, the IP phone will handle an incoming intercom call like a normal incoming
call. Intercom Allow is enabled by default.
Note
Intercom Mute
Intercom Mute allows the IP phone to mute the microphone for incoming intercom calls.
Intercom Mute is disabled by default.
Intercom Tone
Intercom Tone allows the IP phone to play a warning tone before answering an intercom call.
Intercom Tone is enabled by default.
Intercom Barge
Intercom Barge allows the IP phone to automatically answer an incoming intercom call while an
active call is in progress. The active call will be placed on hold. If you disable this feature, the IP
phone will handle an incoming intercom call like a normal incoming call while there is already an
active call on the IP phone. Intercom Barge is disabled by default.
Note
Procedure:
1. Navigate to Menu->Features->Intercom.
2. Make the desired changes.
3. Press Save.
Intercom features are configurable via web user interface at the path Features->Intercom.
To enable the phone to receive a new incoming call when it has an active call, make sure that call
waiting feature is enabled on the phone in advance. For more information, refer to Configuring
the Call Waiting.
Your administrator can set a period of delay time before the phone automatically answers
intercom calls.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English