Advanced Phone Features
195
support this feature.
When receiving a new voice mail, the phone plays a warning tone and the power indicator LED
slowly flash red. A message of “n New Voice Mail(s)” (“n” indicates the number of unread voice
messages) are displayed on the LCD screen.
If the voice mail pop-up message box disappears, it won't pop up again unless the user receives
a new voice mail or the user re-registers the account that has unread voice mail(s).
Note
Configuring the Voice Mail Code
Procedure:
1. Navigate to Menu->Message->Voice Mail->Set Voice Mail Code.
You can also press the MESSAGE key when the voice mail code is not configured.
2. Enter the voice mail code (for example, *4) in the desired account field.
3. Press Save.
Voice mail code is configurable via web user interface at the path Account->Advanced.
Note
When the phone receives a voice mail, the text message window will pop up by default. .Your
system administrator can disable this feature.
Voice mail access codes must be predefined by your system administrator on the system
server.
To Next Page
Loading...
Need help?
General
