Yealink T54S

Call Features
277
Dial Now File Customization
The dial now file helps create multiple dial now rules. At most 100 dial now rules can be added to the IP
phone. It is not applicable to T19(P) E2 IP phones.
You can ask the distributor or Yealink FAE for dial now file template. You can also obtain the dial now file
template online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
Topics
Dial Now File Attributes
Customizing the Dial Now File
Dial Now File Attributes
The following table lists the attributes you can use to add dial-now rules to the dial now file:
Attributes
Description
DialNowRule
Specify the dial-now number.
LineID
Specify a registered line to apply the dial-now rule.
Valid Values: -1~15
-1 stands for Auto (the first registered line);
0~15 stand for line1~line16 (Vary by phone models:
T54S/T48S/T48G/T46S/T46G/T29G: 0~15; T52S/T42G/T42S: 0~11;
T41P/T41S/T27P/T27G: 0~5; T40P/T40G/T23P/T23G: 0~2; T21(P) E2: 0~1)
Multiple line IDs are separated by commas.
Note: This is not applicable to T19(P) E2 IP phones.
Customizing the Dial Now File
1. Open the dial now file.
2. To add a dial-now rule, add <Data DialNowRule="" LineID="" /> to the file. Each starts on a new
line.
3. Specify the values within double quotes.
For example,
<Data DialNowRule="1001" LineID="0" />
4. Save the changes and place this file to the provisioning server.
Replace Rule Configuration
You can configure replace rules either one by one or in batch using a replace rule template.
The following table lists the parameters you can use to configure replace rule.