Yealink T54S

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
336
Description
It configures the destination number of the busy forward on a phone basis.
Note: It works only if “features.fwd.allow” and “forward.busy.enable” are set to 1 and
value of the parameter “features.fwd_mode” is set to 0 (Phone) (except T19(P) E2 IP
phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->Busy Forward->Target
Phone UI
Menu->Features->Call Forward->Busy Forward->Forward to
Parameter
forward.busy.on_code
<y0000000000xx>.cfg
Description
It configures the busy forward on code to activate the server-side busy forward
feature.
The IP phone will send the busy forward on code and the pre-configured destination
number (configured by the parameter “forward.busy.target”) to the server when you
activate busy forward feature on a phone basis.
Note: It works only if “features.fwd.allow” and “forward.busy.enable” are set to 1 and
value of the parameter “features.fwd_mode” is set to 0 (Phone) (except T19(P) E2 IP
phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->Busy Forward->On Code
Phone UI
Menu->Features->Call Forward->Busy Forward->On Code
Parameter
forward.busy.off_code
<y0000000000xx>.cfg
Description
It configures the busy forward off code to deactivate the server-side busy forward
feature.
The IP phone will send the busy forward off code to the server when you deactivate
busy forward feature on a phone basis.
Note: It works only if “features.fwd.allow” and “forward.busy.enable” are set to 1 and
value of the parameter “features.fwd_mode” is set to 0 (Phone) (except T19(P) E2 IP
phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->Busy Forward->Off Code