Yealink T54S

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
342
Phone UI
Menu->Features->Call Forward->AccountX->Busy Forward->Off Code
Parameter
account.X.timeout_fwd.enable
[1]
<MAC>.cfg
Description
It triggers no answer forward feature to on or off.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones. DND activated on the specific account deactivates the local No Answer
Forward settings.
Permitted
Values
0-Off
1-On, incoming calls to the account X are forwarded to the destination number
(configured by the parameter “account.X.timeout_fwd.target”) after a period of ring
time.
Default
0
Web UI
Features->Forward&DND->Forward->AccountX->No Answer Forward->On/Off
Phone UI
Menu->Features->Call Forward->AccountX->No Answer Forward->No Answer
Forward
Parameter
account.X.timeout_fwd.target
[1]
<MAC>.cfg
Description
It configures the destination number of the no answer forward.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->AccountX->No Answer Forward->Target
Phone UI
Menu->Features->Call Forward->AccountX->No Answer Forward->Forward to
Parameter
account.X.timeout_fwd.timeout
[1]
<MAC>.cfg
Description
It configures ring times (N) to wait before forwarding incoming calls.
The incoming calls will be forwarded when not answered after N*M (M is configurable
by “phone_setting.ring_duration”) seconds.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones.
Permitted
Values
Integer from 0 to 20 (determined by “features.forward.no_answer.show_ring_times”)
Default
2