Yealink T54S

Call Features
341
Description
It configures the destination number of the busy forward.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->AccountX->Busy Forward->Target
Phone UI
Menu->Features->Call Forward->AccountX->Busy Forward->Forward to
Parameter
account.X.busy_fwd.on_code
[1]
<MAC>.cfg
Description
It configures the busy forward on code to activate the server-side busy forward
feature.
The IP phone will send the busy forward on code and the pre-configured destination
number (configured by the parameter “account.X.busy_fwd.target”) to the server when
you activate busy forward feature on the IP phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->AccountX->Busy Forward->On Code
Phone UI
Menu->Features->Call Forward->AccountX->Busy Forward->On Code
Parameter
account.X.busy_fwd.off_code
[1]
<MAC>.cfg
Description
It configures the busy forward off code to deactivate the server-side busy forward
feature.
The IP phone will send the busy forward off code to the server when you deactivate
busy forward feature on the IP phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->AccountX->Busy Forward->Off Code