Yealink T54S

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
340
feature.
The IP phone will send the always forward on code and the pre-configured destination
number (configured by the parameter “account.X.always_fwd.target”) to the server
when you activate always forward feature on the IP phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->AccountX->Always Forward->On Code
Phone UI
Menu->Features->Call Forward->AccountX->Always Forward->On Code
Parameter
account.X.always_fwd.off_code
[1]
<MAC>.cfg
Description
It configures the always forward off code to deactivate the server-side always forward
feature.
The IP phone will send the always forward off code to the server when you deactivate
always forward feature on the IP phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->AccountX->Always Forward->Off Code
Phone UI
Menu->Features->Call Forward->AccountX->Always Forward->Off Code
Parameter
account.X.busy_fwd.enable
[1]
<MAC>.cfg
Description
It triggers busy forward feature to on or off.
Note: It is not applicable to T19(P) E2 IP phones.
Permitted
Values
0-Off
1-On, incoming calls to the account X are forwarded to the destination number
(configured by the parameter “account.X.busy_fwd.target”) when the callee is busy.
Default
0
Web UI
Features->Forward&DND->Forward->AccountX->Busy Forward->On/Off
Phone UI
Menu->Features->Call Forward->AccountX->Busy Forward->Busy Forward
Parameter
account.X.busy_fwd.target
[1]
<MAC>.cfg