Yealink T54S

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
76
Web UI
Settings->Auto Provision->Inactivity Time Expire(0~120min)
Parameter
static.auto_provision.weekly.dayofweek
<y0000000000xx>.cfg
Description
It configures the days of the week for the IP phone to perform auto provisioning
weekly.
Example:
static.auto_provision.weekly.dayofweek = 01
If “static.auto_provision.weekly_upgrade_interval” is set to 0, it means the IP phone will
perform auto provisioning every Sunday and Monday.
If “static.auto_provision.weekly_upgrade_interval” is set to other value (for example, 3),
it means the IP phone will perform auto provisioning by randomly selecting a day
from Sunday and Monday every three weeks.
Note: It works only if “static.auto_provision.weekly.enable” is set to 1 (On).
Permitted
Values
0,1,2,3,4,5,6 or a combination of these digits
0-Sunday
1-Monday
2-Tuesday
3-Wednesday
4-Thursday
5-Friday
6-Saturday
Default
0123456
Web UI
Settings->Auto Provision->Day of Week
Parameter
static.auto_provision.weekly.begin_time
static.auto_provision.weekly.end_time
<y0000000000xx>.cfg
Description
It configures the starting/ending time of the day for the IP phone to perform auto
provisioning weekly.
Note: It works only if “static.auto_provision.weekly.enable” is set to 1 (On).
Permitted
Values
Time from 00:00 to 23:59
Default
00:00
Web UI
Settings->Auto Provision->Time
Parameter
static.auto_provision.flexible.enable
<y0000000000xx>.cfg
Description
It triggers the flexible feature to on or off.
Note: The day within the period is based upon the phone's MAC address and does
not change with a reboot whereas the time within the start and end is calculated again