Yealink T54S

Phone Provisioning
77
with every reboot.
Permitted
Values
0-Off
1-On, the IP phone will perform auto provisioning at random between a starting time
configured by the parameter "static.auto_provision.flexible.begin_time" and an ending
time configured by the parameter "static.auto_provision.flexible.end_time" on a
random day within the period configured by the parameter
"static.auto_provision.flexible.interval".
Default
0
Web UI
Settings->Auto Provision->Flexible Auto Provision
Parameter
static.auto_provision.flexible.interval
<y0000000000xx>.cfg
Description
It configures the interval (in days) for the IP phone to perform auto provisioning.
The auto provisioning occurs on a random day within this period based on the
phone's MAC address.
Example:
static.auto_provision.flexible.interval = 30
The IP phone will perform auto provisioning on a random day (for example, 18) based
on the phone's MAC address.
Note: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).
Permitted
Values
Integer from 1 to 1000
Default
30
Web UI
Settings->Auto Provision->Flexible Interval Days
Parameter
static.auto_provision.flexible.begin_time
<y0000000000xx>.cfg
Description
It configures the starting time of the day for the IP phone to perform auto
provisioning at random.
Note: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).
Permitted
Values
Time from 00:00 to 23:59
Default
02:00
Web UI
Settings->Auto Provision->Flexible Time
Parameter
static.auto_provision.flexible.end_time
<y0000000000xx>.cfg
Description
It configures the ending time of the day for the IP phone to perform auto provisioning
at random.
If it is left blank or set to a specific value equal to starting time configured by the
parameter “static.auto_provision.weekly.begin_time”, the IP phone will perform auto