Yealink VC Series Administrator's Guide

Administrator‘s Guide for Yealink Video Conferencing Systems
100
Parameter
Description
Configuration Method
Valid Values: Integer from 1000 to
1500
Default: 1500
Note: If you change this
parameter, the system will reboot
to implement the changes.
To configure MTU via the web user interface:
1. Click on Network->Advanced.
2. In the MTU block, enter the desired value in the Video MTU field.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4. Click Confirm to reboot the system immediately.
To configure MTU via the remote control:
1. Select Menu->Advanced (default password: 0000) ->Advanced Network.
2. Enter the desired value in the Video MTU(0-1500) field.
3. Press the Save soft key to accept the change.

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English