Yealink VC Series - X Authentication

Administrator‘s Guide for Yealink Video Conferencing Systems
44
The default option is 132.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5. Click Confirm to reboot the system immediately.
To configure VLAN via the remote control:
1. Select Menu->Advanced (default default password: 0000) ->Advanced Network.
2. In the VLAN block, check the Active checkbox.
3. Enter the VLAN ID in the VID(1-4094) field.
4. Enter the priority value (0-7) in the Priority field.
5. Press the Save soft key to accept the change.
The display device prompts ―Reboot now?‖.
6. Select OK to reboot the system immediately.
IEEE 802.1X authentication is an IEEE standard for Port-based Network Access Control
(PNAC), part of the IEEE 802.1 group of networking protocols. It offers an authentication
mechanism for devices to connect to a LAN or WLAN. The 802.1X authentication involves
three parties: a supplicant, an authenticator and an authentication server. The