To configure call match via the web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Call Match.
3. Click Confirm to accept the change.
To configure call match via the remote control:
1. Select Menu->Call Features.
2. Check the Call Match checkbox.
3. Press the Save soft key to accept the change.
The system maintains a local call hisotry, which contains call information such as remote
party identification, time and date, and call duration. Users can manage call hisotry list
via the remote control, web user interface and VCP40 phone. To save call history, you
must enable the history record feature on the system in advance. If history record
feature is disabled, the system will not save call history and prompt the missed call.
The save call history parameter on the system is described below:
To Next Page
Loading...
Need help?
General
