Yealink VC Series - Configuring Security Features; User Mode; Administrator Password; Web Server Type

Configuring Security Features
129
This chapter provides information for making configuration changes for the following
security-related features:
 User Mode
 Administrator Password
 Web Server Type
 Transport Layer Security
 Secure Real-Time Transport Protocol
 H.235
Users can access the system menu options directly (except the ―Advanced‖ menu
option) on the display device. The ―Advanced‖ menu option is protected by
administrator privilege. You can enable the user mode to provide two levels of access
for the menu options. You need to configure a password for the user when the user
mode is enabled. Users are prompted to enter the password when accessing the menu
options (except the ―Status‖ menu option). After the user mode is enabled, the user can
login to the web user interface of the system with user privilege. The default user name
is ―user‖.
User mode parameters on the system are described below:
Parameter
Description
Configuration Method
User Type
Specifies the user mode.
Default: Administrator
Note: To enable the user mode,
you need to select User for this
parameter.
Web User Interface
User Mode
Enables or disables the user
mode.
Default: Disabled
Note: It is only applicable to the
user mode. The administrator
mode is enabled by default.
Web User Interface
User Password
Configures a password for the
user to access the menu options
Web User Interface