Yealink VC Series Administrator's Guide

Configuring Call Preferences
75
To configure DND during a call via the web user interface:
1. Click Home.
2. Check the DND checkbox.
The display device will display , and the LCD screen of the VCP40 phone will
display .
To configure DND during a call via the remote control:
1. Press the More soft key.
2. Check the DND checkbox.
3. Press the Back soft key to exit the More window.
The display device will display , and the LCD screen of the VCP40 phone will
display .
The auto answer feature allows the system to answer incoming calls automatically. The
auto answer mute feature allows the system to turn off the microphone when an
incoming call is answered automatically. The auto answer mute feature is available only
when the auto answer feature is enabled. The auto answer multiway feature allows the
system to answer new incoming calls automatically during an active call.
Auto answer parameters on the system are described below:
Parameter
Description
Configuration Method
Auto Answer
Enables or disables the auto
answer feature on the system.
Default: Enabled
Remote Control
Web User Interface
Auto Answer
Mute
Enables or disables the auto
answer mute feature on the
system.
Default: Enabled
Auto answer mute feature is
configurable only when the auto
answer is enabled.
Remote Control
Web User Interface
Auto Answer
Multiway
Enables or disables the auto
answer multiday feature on the
system.
Default: Disabled
Remote Control
Web User Interface
To configure auto answer via the web user interface:
1. Click on Setting->Call Features.

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English