Yealink VC Series Administrator's Guide

Configuring System Settings
81
This chapter provides information for making configuration changes for the system, such
as language, time and date, backlight of the VCP40 video conferencing phone,
vido&audio setting and camera setting:
Topics include:
 General Setting
 Audio Setting
 Adjusting MTU of Video Packets
 Dual-Stream Protocol
 Mix Sending
 Configuring Camera Settings
 Far Control of Near Camera
 Camera Control Protocol
 Tones
When the system is idle, the site name is displayed on the status bar of display device
and VCP40 phone. When the user makes an IP address call to the far site, the site name
will be displayed on the display device of the far site. Site name can consist of letters,
numbers or special characters. You can configure the site name of the system via the
remote control or web user interface.
The site name parameter is described below:
Parameter
Description
Configuration Method
Site Name
Configures the site name of the
system.
Valid values: String within 64
characters
Default:
For VC400: Yealink VC400
For VC120: Yealink VC120
Remote Control
Web User Interface

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English