Yealink VC Series - Bandwidth

Configuring Call Preferences
79
Parameter
Description
Configuration Method
system.
Default: Auto
If Auto is selected, the system will
select the appropriate uplink
bandwidth automatically.
Downlink
Bandwidth
Specifies the maximum receiving
bandwidth for the system.
Default: Auto
If Auto is selected, the system will
select the appropriate downlink
bandwidth automatically.
Remote Control
Web User Interface
To configure bandwidth settings via the web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Uplink Bandwidth.
3. Select the desired value from the pull-down list of Downlink Bandwidth.
4. Click Confirm to accept the change.
To configure bandwidth settings via the remote control:
1. Select Menu->Call Features->Bandwidth Settings.
2. Select the desired value from the pull-down list of Uplink Bandwidth.
3. Select the desired value from the pull-down list of Downlink Bandwidth.
4. Press the Save soft key to accept the change.