Configuring Network
43
4. Select the desired value (0-7) from the pull-down list of Priority.
5. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6. Click Confirm to reboot the system immediately.
To configure DHCP VLAN discovery via the web user interface:
1. Click on Network->Advanced.
2. In the VLAN block, select the desired value from the pull-down list of DHCP VLAN
Active.
3. Enter the desired option in the Option field.
To Next Page
Loading...
Need help?
General
