Yealink VC Series Administrator's Guide

Administrator‘s Guide for Yealink Video Conferencing Systems
42
Parameter
Description
Configuration Method
7 is the highest priority, 0 is the
lowest priority.
Default: 0
Note: If you change this
parameter, the system will reboot
to implement the changes.
DHCP
VLAN->Active
Enables or disables the DHCP
VLAN discovery feature on the
system.
Default: Enabled
Note: If you change this
parameter, the system will reboot
to implement the changes.
Web User Interface
Option
Configures the DHCP option from
which the system obtains the
VLAN settings.
You can configure at most five
DHCP options and separate them
by commas.
Valid Values: 128-254
Default: 132
Note: If you change this
parameter, the system will reboot
to implement the changes.
Web User Interface
To configure the VLAN via the web user interface:
1. Click on Network->Advanced.
2. In the VLAN block, select the desired value from the pull-down list of Active.
3. Enter the VLAN ID in the VID(1-4094) field.

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English