Yealink VC Series Administrator's Guide

Administrator‘s Guide for Yealink Video Conferencing Systems
152
Parameter
Description
Configuration Method
If you change this parameter, the
system will reboot to implement
the changes.
To configure web server type via the web user interface:
1. Click on Network->Advanced.
2. In the SNMP block, select Enabled from the pull-down list of Active.
3. Enter the SNMP port in the Port field.
4. Enter the IP address or domain name of the SNMP server in the Trusted Address
field.
Multiple IP addresses or domain names should be separated by spaces.
5. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6. Click Confirm to reboot the system immediately.

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English