Yealink VC Series - Page 37

Getting Started
27
11. Press (Complete soft key) to complete the setup wizard.
Note
Yealink Demo1 to Yealink Demo3 are three default contacts stored in the local directory.
You can place a test call to the default contact, and the test call will be routed to the
Yealink demo video conferencing system. Yealink demo contacts can help users to test
quickly whether the system is normal after installation.
Do to remember the new administrator password. If you forget the password, you will
need to reset the system to the factory settings, and then reset the password or use the
default password‖0000‖.
For more information, refer to Resetting to Factory on page 148.