Yealink W52H Manual

Yealink W52P & W52H Cordless IP Phone
For more information, call us at 1-877-638-2855 or visit http://www.bullseyetelecom.com/learning-center
BASIC OPERATIONS
Turning Handset On
 Press and hold until the LCD screen lights
up, OR
 Place the handset in the charger cradle. The
handset will be turned on automatically.
Turning Handset Off
 Press and hold again to turn the handset
off.
Locking/Unlocking Keypad
 Press and hold to lock/unlock the keypad.
Switching Silent Mode On/Off
 Press and hold to switch the silent mode
on/off.
HANDSET SETTINGS
Renaming the Handset
1. Press the OK key to enter the main menu, and
select Settings->Handset Name.
2. Edit the current value in the Rename field.
3. Press the Save soft key to accept the change.
Adjusting the Volume
 Press or during a call to adjust the volume
of the ear piece.
 Press or when the handset is idle to adjust
the ringer volume.
Changing Your Ring Tone
1. Press the OK key to enter the main menu, and
select Settings->Audio->Ring Tones->
3. Press or to select the desired ring tone.
2. Press or to highlight the Intercom Call
option or the desired line.
3. Press or to select the desired ring tone.
4. Press the Save soft key to accept the change.
Adding a Directory Contact
1. Press the OK key to enter the main menu, and
select Directory.
3. Enter the desired values in the Name, Number
and Mobile fields.
2. Press the Options soft key, and select New
Contact.
4. Press the Save soft key to accept the change.
Assigning a Speed Dial Number
1. Press the OK key to enter the main menu, and
select Settings->Telephony->Speed Dial.
2. Press or to highlight the desired speed dial
key, and press the Assign soft key.
3. Press or to highlight the desired entry, and
press the OK soft key.
 If both the office number and mobile number
are stored, press or to highlight the
desired number, and press the OK soft key
again.
BASIC CALL FEATURES
Placing Calls
To place a call directly:
Enter the desired number when the handset is idle,
and press .
To place a call from the local directory:
1. Press when the handset is idle.
2. Press or to highlight the desired entry, and
press .
To place a call from the call history:
1. Press the History soft key, and select the desired
call history list.
2. Press or to highlight the desired entry, and
press .
To place a call from the redial number list:
1. Press when the handset is idle.
2. Press or to highlight the desired entry, and
press .
To place a call using the speed dial key:
 Press and hold the speed dial key to place a call
to the number assigned to it.
Answering Calls
To answer a call, do one of the following:
 Press the Accept soft key.
 Press .
 Press .

Yealink W52H Specifications

General

Resolution	128 x 160 pixels
Standby Time	Up to 120 hours
Headset Port	3.5 mm
Range	Up to 50 meters indoors, 300 meters outdoors
Power Saving Mode	Yes
Display	1.8" color display
Battery	Lithium-ion battery
DECT Standards	DECT, GAP
Codecs	G.726, G.722, G.711, G.729
Power Supply	5V DC
Dimensions (Handset)	144 mm x 51 mm x 24 mm
Operating Temperature	0° to +40°C
Humidity	10% to 90% (non-condensing)
Phonebook	Up to 500 contacts