Yealink W52P - Base Station Setup; Connecting the Base Station; AC Power Connection; Power over Ethernet (PoE) Connection

16
To retrieve a parked call:
1. Dial *33 plus the seven-digit number of the phone.
• If you have four-digit dialing enabled, you must enter the leading number
before the seven-digit number.
2. Press the green phone button.
Speed Dial
You can assign up to eight speed dial numbers to important or frequently called
contacts.
To place a call using a speed dial key:
When the handset is idle, press and hold the digit key assigned to the number you
want to call.
To assign a speed dial number:
1. Press OK to enter the main menu.
2. Select the Settings button >> Telephony >> Speed Dial.
3. The screen will display all the available speed dial keys. Use the up and down
navigation buttons to highlight the desired speed dial key, and then press
Assign.
4. Select the desired contact from the directory.
• If only one number is stored for the contact in the selected directory,
press OK to assign the number to the selected speed dial key.
• If more than one number is stored for the contact, press OK to display
the two numbers. Select one using the up and down navigation button
and then hit OK to assign the number.
To delete a speed dial number:
1. Press OK to enter the main menu.
2. Select the Settings button >> Telephony >> Speed Dial.
3. The screen will display all the available speed dial keys. Use the up and down
navigation buttons to highlight the desired speed dial key.
4. Press Clear Key or the left navigation button to delete the assigned speed dial
number.