EasyManuals Logo

Yealink W73H User Manual

Yealink W73H
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
| Customizing Your Phone | 79
Changing the Wallpaper
You can change the wallpaper that is displayed on the idle screen.
About this task
It is only applicable to W73H/W78H/W56H/W53H/W59R/DD phone/CP935W.
Procedure
1. Go to OK > Settings > Display > Wallpaper.
On the DD phone, go to Menu > Basic Settings > Display > Wallpaper.
On the CP935W, go to More > Basic > Display > Wallpaper.
2. Press the navigation keys to select the desired image.
On the CP935W, tap the desired image directly.
3. Confirm the action.
Setting the Screen Saver
The screen saver is designed to protect your phone screen. When the screen saver is enabled, an analog
clock will be activated and appear on the phone screen if the handset is idle for approximately 10 seconds.
About this task
It is only applicable to W73H/W78H/W56H/W53H/W59R.
Procedure
1. Go to OK > Settings > Display > Screen Saver.
2. Press Change to select the Screen Saver check box (the default status is checked).
Changing the Brightness
For W73H/W78H/W56H/W53H/W59R, the handset backlight in charger or out of charger can be configured
independently.
When in charger/out of charger is enabled, the backlight will be turned off after the handset is idle for about
30 minutes when the handset is or is not in the charging cradle. When an incoming call arrives, a key is
pressed or the handset status changes, the backlight is automatically turned on.
For CP930W/CP935W, the backlight automatically turns off, when the phone is charging and inactive for a
specified time.
Note: When the CP930W/CP935W is not in charging, its backlight will be turned off after the phone
is inactive for about 30 seconds.
Procedure
1. Go to OK > Settings > Display > Display Backlight.
On the CP930W, go to Menu > Settings > Basic Settings > Display > Display Backlight.
On the DD phone, go to Menu > Basic Settings > Display > Backlight.
On the CP935W, go to More > Basic > Display > Backlight.

Table of Contents

Other manuals for Yealink W73H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink W73H and is the answer not in the manual?

Yealink W73H Specifications

General IconGeneral
Headset Support3.5mm headset jack
DECT StandardsCAT-iq2.0
Operating Temperature0°C to 40°C
Display1.8" 128x160 TFT color screen
Resolution128x160 pixels
BatteryLithium-ion battery
Audio FeaturesFull-duplex speakerphone, HD audio
Indoor RangeUp to 50 meters
Outdoor Range300m

Related product manuals