Yealink W73H User Manual

| Audio Settings | 89
Procedure
1. Go to OK > Settings > Audio > Ring Tones > Melodies.
On the CP930W, go to Menu > Settings > Basic Settings > Sound > Ring Tones.
On the CP935W, go to More > Basic > Sound > Ring Tones > Common.
On the DD phone, go to Menu > Basic Settings > Sound > Ring Tones > Common.
2. Select the desired ring tone for a specific line.
The ring tone is played automatically.
3. Confirm the action.
Silent Charging
You can enter silent mode when the handset is charging. When you exit charging, return to the volume
before charging. It is not applicable to DD phones/CP935W.
Procedure
1. Go to OK > Settings > Audio.
On the CP930W, go to Menu > Settings > Basic Settings > Sound.
2. Press Change to select the Silent Charging check box.
Setting the Advisory Tone
Advisory tones are the acoustic signals of your handset, which inform you of different actions and states. It
is not applicable to DD phones.
About this task
You can configure the following advisory tones independently:
• Keypad Tone: plays when you press any key on the keypad. It is not applicable to CP935W.
• Key Tone: plays when you use the dialpad. It is only applicable to CP935W.
• Touch Tone: plays when you tap the keys (except the touch keypad). It is only applicable to CP930W/
CP935W.
• Confirmation: plays when a setting is changed or the handset is placed in the charger cradle. It is not
applicable to CP935W.
• Low Battery: plays when the battery's remaining capacity is low and the handset needs charging.
Note: If the silent mode is activated, the advisory tones will not play, but you can still see the
alert of low battery on the phone screen.
Procedure
1. Go to OK > Settings > Audio > Advisory Tones.
On the CP930W, go to Menu > Settings > Basic Settings > Sound > Advisory Tones.
On the CP935W, go to More > Basic > Sound > Advisory Tone.
2. Select the desired value from the Keypad Tone field.
On the CP935W, select the desired value from the Key Tone field.
3. On the CP930W/CP935W, select the desired value from the Touch Tone field.

Yealink W73H Specifications

General

Headset Support	3.5mm headset jack
DECT Standards	CAT-iq2.0
Operating Temperature	0°C to 40°C
Display	1.8" 128x160 TFT color screen
Resolution	128x160 pixels
Battery	Lithium-ion battery
Audio Features	Full-duplex speakerphone, HD audio
Indoor Range	Up to 50 meters
Outdoor Range	300m