Yealink W73P User Manual

Yealink W73P | User Guide
© Gamma. All rights reserved. Confidential.
Page 5 of 18
Getting Started
The W73P is a single cell DECT device from Yealink. The W73P has two components, the W70B
base station and the W73H handset. You can purchase additional W73H handsets separately, though
one comes in the W73P package.
The W73P will allow you to register up to 10 users using the W73H handset per W70B base station.
When using a RT30 Repeater, it also supports "Cascade mode" as well as "Star Mode". For full
details on these modes, please see the Yealink DECT Repeater RT30 guide.
Before you use your phone, you should take some time to get familiar with its features and user
interface.
W70B Base Station
Number
Item
Description
1
Registration LED
Indicates the handset registration status or the
base station is in the paging mode.
2
Network Status LED
Indicates the network status.
3
Power LED Indicator
Indicates the power status of the base station.
4
Paging Key
- Locates a misplaced handset.
- Toggles the registration mode.
- Resets the base station to factory settings

Yealink W73P Specifications

General

Handset type	Wireless handset
Product type	IP mobile phone
Product color	Gray
Keypad illumination	Yes
Caller ID	-
Lines quantity	- lines
Phonebook capacity	100 entries
Battery voltage	3.7 V
Battery capacity	1010 mAh
Input current	0.2 A
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Number of handles included	- pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Package depth	104 mm
Package width	181 mm
Handset weight	112 g
Package height	90 mm
Package weight	8314 g
Handset dimensions (WxDxH)	144 x 48 x 21 mm