NeoGate TA410/810 User Manual
33/51
> Other Settings
Figure III-4-2FXO Port Other Settings
Table III-4-2 Description of FXO Port Other Settings
Hangup
Detection
Hangup Type
Select which kind of hangup type will be used to
detect the call and hang up.
Busy Detection
Enable or disable Busy Detection. It is used for
detecting far end hangup or busy signal.
Busy Count
If Busy Detection is enabled, it is also possible to
specify how many busy tones to wait for before
hanging up. The default is 4, but better results can
To Next Page
Loading...
Need help?
General
