YOKOGAWA 436101 User Manual

4-4
IM 04P02B01-01E
Entering Characters
Use the key or SHIFT + key to move the cursor.
SHIFT key + key
key
Cursor
Unit=ppm
CHR:a-z
Use the CHARACTER key or SHIFT + CHARACTER key to select the character type.
Use the
key or SHIFT + key to select a character. You repeat these steps to
set the character string.
Character type
Unit=ppm
CHR:a-z
The character type changes in the following order: uppercase alphabet, lowercase
alphabet, numbers, and symbols.
SHIFT key + key
key
Unit=ppm
CHR:a-z
p
o
n
l
k
j
When you press the key, the change is applied and the next screen is displayed.
Inserting Characters
Press the
key or SHIFT + key to move the cursor to the position where the
character is to be inserted.
Press the CHARACTER key or SHIFT + CHARACTER key to show Ins DISP and then
press the key. A space for one character is inserted. Enter the character.
Position to insert the character
Display Ins DISP
Unit=ppm
CHR:Ins DISP
Deleting a Character
Use the
key or SHIFT + key to move the cursor to the character to be deleted.
Press the CHARACTER key or SHIFT + CHARACTER key to show Del DISP and then
press the
key. The character is deleted.
Deleting an Entire Character String
Press the CHARACTER key or SHIFT + CHARACTER key to show Clear DISP and
then press the
key. The entire character string is deleted.
Copying & Pasting a Character String
Show the copy source character string.
Press the CHARACTER key or SHIFT + CHARACTER key to show Copy DISP and
then press the key. The character string is saved to the memory.
Show the copy destination.
Press the CHARACTER key or SHIFT + CHARACTER key to show Paste DISP and
then press the
key. The character string is pasted.
4.2 Key Operations

YOKOGAWA 436101 Specifications

General

Brand	YOKOGAWA
Model	436101
Category	Measuring Instruments
Language	English