6-1
IM CA500-01EN
Other Settings
6
Chapter 6 Other Features
6.1 Auto Power-off, Turning the Light Timer On
and Off, and Turning the Light On and Off
Procedure
1.
With the source value and measurement value displayed, press MENU. A menu screen
appears.
2.
Use the cursor keys to select Device Setup, and then press ENTER. A Device Setup screen
appears.
Turn auto power-off on and off
3.
Use the cursor keys to select Auto Power Off. ON and OFF appear in the selection menu.
Turn auto power-off
on and off.
Turn the light timer
on or off.
4.
Use the arrow keys to select ON or OFF.
To finish entering the settings here, proceed to step 7.
Turning the Light Timer On and Off
5.
User cursor keys to select Light Timer. ON and OFF appear in the selection menu.
6.
Use the arrow keys to select ON or OFF
Confirming the Settings
7.
Press the arrow key corresponding to EXIT SETUP. The settings are confirmed, and a screen
appears showing the source value and measurement value.
Pressing ESC causes the instrument to discard the settings and return to the menu screen.
To initialize the settings, pressing the arrow key corresponding to INIT SETUP.
Turning the Light On and Off and Adjusting the Brightness
1.
Press on the instrument’s front panel. Each time you press the soft key, the setting toggles
between ON (dark), bright, and OFF.
To Next Page
Loading...
Need help?
General
