YOKOGAWA FLXA21 User Manual

<7. COMMISSIONING OF SC (Conductivity)>
7-2
IM 12A01A02-01E 8th Edition : Oct. 01, 2015-00
Table 7.1 Menu Structure and Default Values in “Commissioning”
Parameter Ref. sect.
Measurement setup Measurement 7.1.1
Congure sensor
Sensor type 7.1.2
Measuring unit
Cell constant (factory)
Temperature settings
Temp. element 7.1.3
Temp. compensation Compensation 7.1.4
Reference temp.
Method
Calibration settings Limits: Air adjust 7.1.5
c.c.
Timing: Step Range
Stabilization time
Calibr.interval
Concentration Additional table 7.1.6
Unit for table
Sensor diag. settings Process time: 7.1.7
Heat cycle:
Dene heat cycle
Output setup mA 7.2
Output
Process parameter
Setup
Linear
0 % value
100 % value
Table
Burn
Damping time
Simulate Simulation perc.
Congure Hold
Error conguration 7.3
Logbook conguration 7.4
Advanced setup Settings 7.5.1
Tag 7.5.2
Passwords 7.5.3
Date/Time 7.5.4
Communication 7.5.5
HART
PH201G
Factory setup 7.5.6
Display setup Main display (Dual display, Individual display) 7.6.1
Trend 7.6.2
Auto Return 7.6.3
Adjust contrast 7.6.4
MONITOR display 7.6.5
Calculated data setup Function 7.7
NOTE
All the parameters for the quick setup (underlined ones in Table 7.1) are crucial for measurement.
If you change any of them, other parameters may be initialized. For the parameters that may
initialize other values, see Appendix 2.

YOKOGAWA FLXA21 Specifications

General

Brand	YOKOGAWA
Model	FLXA21
Category	Measuring Instruments
Language	English