User’s
Manual
All Rights Reserved. Copyright © 2016, 4th Edition: Mar. 01, 2017 (YK)
Supplement
Model FLXA202 / FLXA21
2-Wire Analyzer
IM 12A01A02-01E 1/11
8th Edition
Thank you for selecting our FLXA202/FLXA21 2-Wire Analyzer.
Though User’s Manual, IM 12A01A02-01E 8th Edition, is provided with the product, an addition to
the manual has been made.
Please use the following contents after a reading before using the FLXA202/FLXA21.
Note
Addition
(page i)
General Specications
Contents Document number Note
FLXA21 2-wire Analyzer
FOUNDATION Fieldbus Communication
GS 12A01A02-71E
These are included In attached
CD-ROM
FLXA21 2-wire Analyzer
PROFIBUS PA Communication
GS 12A01A02-72E
User’s Manual
Contents Document number Note
FLXA202/FLXA21
Safety Precautions
IM 12A01A02-20E
Attached to the product
Note
Note: Please read the Safety Precautions (IM 12A01A02-20E) before using the product.
The Safety Precautions includes Control Drawings of intrinsic safety, nonincendive and Type n that
describes specic condition for using FLXA202/FLXA21 in hazardous/classied location.
Change and addition of the mark position
(page iv) replacement
n Mark position of intrinsic safety and nonincendive
The mark position is shown as follows
FLXA202-D-*-…
Type:-CB Type:-CD Type:-DD Type:-CH
*1
*2
*4
*3
*6
*5
*7
*1: This marking conforms to Intrinsic safety of IECEx.
*2: This marking conforms to Intrinsic safety of ATEX.
*3: This marking conforms to Intrinsic safety of CSA.
*4: This marking conforms to Intrinsic safety of FM.
*5: This marking conforms to nonincendive of CSA.
*6: This marking conforms to nonincendive of FM.
*7: This marking conforms to Intrinsic safety of NEPSI.
To Next Page
Loading...
Need help?
General
