<1. INTRODUCTION AND GENERAL DESCRIPTION>
1-18
IM 12A01A02-01E 8th Edition : Oct. 01, 2015-00
WARNING
Don’t install “general purpose type” instruments in the hazardous area.
CAUTION
The Instrument is packed carefully with shock absorbing materials, nevertheless, the instrument
may be damaged or broken if subjected to strong shock, such as if the instrument is dropped.
Handle with care.
CAUTION
This instrument is a Class A product, and it is designed for use in the industrial environment.
Please use this instrument in the industrial environment only.
CAUTION
When you open the front panel, make sure the screws are completely out of the screw holes, and
then open the front panel slowly in order not to damage the threaded parts on the housing. If the
threaded parts are damaged and the screws cannot be tightened, the waterproof performance
will deteriorate.
CAUTION
The HART communication may be inuenced by strong electromagnetic eld.
In this case another trial of the HART communication and/or operation with FLXA202/FLXA21
touch screen can be carried out.
WARNING
• Do not use an abrasive or organic solvent in cleaning the instrument.
• Substitution of components may impair suitability for Division 2.
Do not remove or replace while circuit is live unless area is know to be non hazardous.
Explosion Hazard – Do not disconnect equipment unless area is known to be non
hazardous.
Do not reset circuit breaker unless power has been removed from the equipment or the area
is known to be non hazardous.
To Next Page
Loading...
Need help?
General
