5. Signal Cable Connection to Input/
Output Modules
The connections between the I/O modules and the field devices can be established by directly
wiring the cables from the field devices to the terminals of I/O modules, connecting through
the terminal boards using signal cables and connectors or using the user-prepared MIL ca-
bles.
This chapter describes how to apply pressure clamp terminal blocks, connection cables, and
other I/O module related peripherals.
<5. Signal Cable Connection to Input/Output Modules > 5-1
IM 32Q06C10-31E 4th Edition : Jan.30,2015-00
To Next Page
Loading...
