7.2.8 Exchange Fiber-Optic Cables
Replace Fiber-optic cable according to the following procedure.
n
Procedure of Exchanging Fiber-Optic Cables
1.
Disconnect the fiber-optic cable from the optical ESB bus repeater module. Cap the cable
to prevent dust infiltration.
2. Exchange the fiber-optic cables.
3. Uncap the fiber-optic cable and connect it to the optical ESB bus repeater module. The
connector that connects the fiber optic cable has an IN end and an OUT end. Be sure you
connect the correct end.
4. Check the diagnostic information window on the SENG for any errors.
<7.2 Replacing Common Modules > 7-19
IM 32Q06C10-31E 4th Edition : Jan.30,2015-00
To Next Page
Loading...
