EasyManua.ls Logo

YOKOGAWA SSC60D - LED Display

YOKOGAWA SSC60D
265 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.2.2 LED Display
RCV 1 2
SND 1 2
1 2 3 4 5 6 7 8
HRDY
RDY
CTRL COPY
SYNC
SCTY
HRDY lamp
RDY lamp
CTRL lamp
COPY lamp
STATUS lamp
RCV lamp
SND lamp
Figure 4.2.2-1 LED Display
HRDY:
The processor module performs self diagnosis. If the processor module hardware is func-
tioning normally, the green lamp turns on. If abnormality is found, the lamp turns off.
RDY:
The green lamp turns on if both the hardware and software are functioning normally. If
either of them is abnormal, the lamp turns off.
CTRL:
The green lamp turns on if the processor module is performing control. If the processor
module is standby, the lamp turns off.
COPY:
In the dual-redundant type safety control unit, the green lamp turns on when program
copy is executed and turns off when program copy is completed.
When a processor module has been replaced or when the unit is stopped and then star-
ted again, the standby-side processor module automatically copies the program of the
control-side processor module. When copy is completed, the lamp turns off. It is always
off in the basic safety control unit (non-redundant configuration).
RCV:
Indicates the control bus communication status. 1 stands for bus1 while 2 stands for
bus2.
V net: When receiving communication frames, the green lamp turns on, otherwise the
lamp turns off.
Vnet/IP: When receiving communication frames, the green lamp blinks, otherwise the
lamp turns off.
SND:
Indicates the control bus communication status. 1 stands for bus1 while 2 stands for
bus2.
V net: When sending communication frames, the green lamp turns on, otherwise the
lamp turns off.
Vnet/IP: When sending communication frames, the green lamp blinks, otherwise the
lamp turns off.
SYNC:
Indicates the time synchronization status.
V net: If the module is synchronizing with V net clock or IRIG-B clock, the green lamp
turns on, otherwise the lamp turns off.
Vnet/IP: If the module is synchronizing with Vnet/IP clock, the green lamp turns on,
otherwise the lamp turns off.
SCTY:
<4.2 Processor Module > 4-6
IM 32Q06C10-31E 4th Edition : Jan.30,2015-00

Table of Contents

Related product manuals