Indicates a potentially hazardous situation which will result in possible injuries or
damage to equipment if proper care is not taken.
Highlights additional information useful to the technician in completing the work
being performed properly.
External wiring, unless specified as an optional connection in the manufacturer’s
product line, is not to be connected inside the control cabinet. Devices such as relays,
switches, transducers and controls and any external wiring must not be installed
inside the micro panel. All wiring must be in accordance with Johnson Controls’
published specifications and must be performed only by a qualified electrician.
Johnson Controls will NOT be responsible for damage/problems resulting from
improper connections to the controls or application of improper control signals.
Failure to follow this warning will void the manufacturer’s warranty and cause serious
damage to property or personal injury.
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz
To Next Page
Loading...
