JOHNSON CONTROLS
32
FORM 150.72-ICOM7
ISSUE DATE: 10/22/2020
SECTION 3 – HANDLING AND STORAGE
LIFTING WEIGHTS
Refer to the unit nameplate for unit shipping weight.
Note that weight may vary depending on unit configu-
ration at the time of lifting. See page 48 for further
information regarding shipping and operating weights.
Rigging and lifting should only be done by
a professional rigger in accordance with a
written rigging and lifting plan. The most
appropriate rigging and lifting method
will depend on job specic factors, such
as the rigging equipment available and
site needs. Therefore a professional rig-
ger must determine the rigging and lifting
method to be used and it is beyond the
scope of the manual to specify rigging
and lifting details.
Carefully read the rigging warning label
on the chiller packaging.
To Next Page
Loading...