2-24
Select instrument function
1-Service 2-Setup 3-Diagnostic
Now press [0] again to return to Main menu.
Please select instrument mode
[RUN] [STANDBY] [MENU]
Now refer to Section 4 to learn about the recommended system parameters for your particular
chemistry application. Next use this information to setup the 2700 SELECT as we have
demonstrated above.
HINT:
Use the Print Setup option to confirm that you have correctly setup your instrument.
Remember, "PrntSetup" can be accessed from Main Menu by pressing [MENU], then [2] for
Setup and then [5] for PrntSetup. Again, refer to Figure 5.2, Menu Flow Chart for an overview.
To Next Page
Loading...
