15
Operation
Figure 14 Calibration Security
Calibration Security
→ Calibration Record → Security
The Calibration menu can be password protected to prevent accidental
or unauthorized sensor calibration (Figure 14).
1. From the Calibration Record menu, select Security, then enter the
default password “ysi123”.
2. Select Set Password [ ] and change the default password.
3. Select the Protect Cal check box to password protect the
Calibration menu.
NOTE: Write down and keep the password in a safe place. Contact
YSI Technical Support if you lose the password (Technical
support).
Figure 15 Language
Language
→ Language
The instrument is shipped with English enabled. If a different language
is desired and selected, the handheld will take approximately 10 to 20
seconds to enable the new language (during the first installation only).
Optional languages:
• Spanish
• French
• German
• Italian
• Portuguese
• Norwegian
• Japanese
• Simplified Chinese
• Traditional Chinese
• Korean
• Thai
Figure 16 Radix Point
Radix Point
→ Radix Point
The radix point can be changed to display a comma or a decimal in
numeric displays (e.g. 1.00 becomes 1,00 when Comma is selected)
(Figure 16).
To Next Page
Loading...
